Description
This filter with cubic container is available in several versions that differ in the different noise suppression circuit used, in particular, a model with RC+varistor combination is available that is certainly the best performing in terms of noise suppression.
The filter should be screwed onto the cable entry of the motor terminal board or it can be mounted with clamps on the outside of it.
Comes with a three-core cable to be connected in parallel to the motor terminals.
Features
Input voltage: ÷
Output voltage:
Output current:
Power output:
Mounting type: Filetto PG9
Link type: Con cavo 30cm
Rated voltage: 3 x 500 VAC
Current rating:
Leakage current:
Mounting type: PG9 thread
Connection type: With 30cm cable
Rated voltage: 3 x 500 VAC
Anti-disturbance circuit: RC||Starred Varistors
Mounting type: PG9 thread
Connection type: With 30cm cable
Rated voltage: 3 x 500 VAC
Luminous flux:
Light beam:
Light:
CCT:
Rated voltage: 3 x 500 VAC
Current rating:
No. of sectors:
LED colors:
Buzzer:
Connection type: With 30cm cable
Mounting type: PG9 thread
Rated voltage: 3 x 500 VAC
Current rating:
Leakage current:
Mounting type: PG9 thread
Connection type: With 30cm cable
Rated voltage: 3 x 500 VAC
Current rating:
Leakage current:
Mounting type: PG9 thread
Connection type: With 30cm cable
Dimensions (mm): 41 x 41 x 41 mm
Weight (g): 120 g
Dimensions [mm]: 41 x 41 x 41
Housing material: Polycarbonate class V2
Filler: Epoxy resin, UL94-V0
Weight: 120/140g
