Description
Due to its small size, this motor filter can be mounted inside the motor terminal board, allowing for the best possible elimination of voltage spikes at disconnection/insertion that can be fatal to the electronics.
The recommended version is the one with RC assembly, but a varistor model is also available. Ideal for three-phase asynchronous motors 50÷60 Hz with power ratings up to 4 kW, it should be used where no more than one operation per second occurs.
Comes with double-sided adhesive tape and leads with lugs 300 mm long.
Features
Input voltage: ÷
Output voltage:
Output current:
Power output:
Mounting type: Biadesivo
Link type: Cavo 30 cm con connettore a forcella
Rated voltage: 110 VAC
Current rating:
Leakage current:
Mounting Type: Double-sided adhesive
Connection type: 30 cm cable with fork connector
Rated voltage: 110 VAC
Anti-disturbance circuit: RC||Varistore
Mounting Type: Double-sided adhesive
Connection type: 30 cm cable with fork connector
Rated voltage: 110 VAC
Luminous flux:
Light beam:
Light:
CCT:
Rated voltage: 110 VAC
Current rating:
No. of sectors:
LED colors:
Buzzer:
Connection type: 30 cm cable with fork connector
Mounting Type: Double-sided adhesive
Rated voltage: 110 VAC
Current rating:
Leakage current:
Mounting Type: Double-sided adhesive
Connection type: 30 cm cable with fork connector
Rated voltage: 110 VAC
Current rating:
Leakage current:
Mounting Type: Double-sided adhesive
Connection type: 30 cm cable with fork connector
Dimensions (mm): 32 x 11 x 20 mm
Weight (g): 15 g
Dimensions [mm]: 32 x 11 x 20
Housing material: PBT, UL94-V0
Filler: Epoxy resin, UL94-V0
Weight: 15g
